For sales and support visit:
hubbellpowersystems.com/contact/

Home › Products › Anchoring › SS (Square-Shaft) Anchors › SS150 [7,000 ft. lb. rating]

SS150 [7,000 ft. lb. rating]

Square-Shaft "SS" multi-helix screw anchors are designed for heavy-guy loading. They have 1-1/2" square steel shafts. Extension shafts must be coupled to the helix section for installation to the proper depth. For installation tool options, see catalog Section 4A.

SS screw anchors consist of three galvanized components: the lead section, the extension shaft, which includes an integral coupling, and the guy adapter. Extensions and guy adapters include a high-strength bolt and nut.

Typical working torque is 7,000 ft.-lb. and minimum ultimate tension strength is 70,000 lb. Note: Ultimate strength ratings apply to properly installed anchors only. Failure to install within 5° of alignment with the guy load will significantly lower strength.

Ordering Information

HIGH-STRENGTH SS ANCHORS for Heavy Tension Loading

High-Strength SS Anchors for Heavy Tension Loading

Ordering Information

LEAD SECTIONS

Helix Configuration Galv. L1
8 & 10" C1100385 30"
10" & 12" C1100871 40"
8", 10" & 12" C1100386 57"
10", 12" & 14" C1100838 84"
14", 14" & 14" C1100504 120"
8", 10", 12" & 14" T110-0521 120"

RATINGS

Mechanical Properties 1.50" Square Shaft
Max. Installation Torque 7,000 ft.-lb.
Min. Ultimate Tension Strength 70,000 lb.

TERMINATION ADAPTERS

Adapters Galv. Notes L3
Thimbleye Adapter C1020023 - 17"
Twineye Adapter C1020024 - 17"
Tripleye Adapter C1020025 - 17"
Ovaleye Adapter C1100041 - 17"
Threaded Adapter C1100026 L5=13-1/2 20"
Chain Shackle †C1100574 L4=1-1/2 5-1/8"
  • †Tripleye® shackle

EXTENSIONS

Helix Configuration Galv. L2
None C1100388 37"
None C1100470 59"
None C1100389 80"
None C1100440 122"
Single 14" helix C1100471 48"
Twin 14" helices C1100454 80"
Triple 14" helices C1100475 123"


Catalog No. Description
P0010041P Bolt used with SS5/150 Extension and Guy Adapters
055449P Nut used with SS5/150 Extension and Guy Adapters
Hubbell Power Systems All contents Copyright© 2001 - Hubbell Incorporated. All rights reserved. Because Hubbell has a policy of continuous product improvement, we reserve the right to change design specifications without notice.
Terms of Use | Contact Us | Site Map
Anchoring