For sales and support visit:
hubbellpowersystems.com/contact/

SS175 [10,500 ft. lb. rating]

Square-Shaft "SS" multi-helix screw anchors are designed for heavy-guy loading. They have 1-3/4" square steel shafts. Extension shafts must be coupled to the helix section for installation to the proper depth. For installation tool options, see catalog Section 4A.

SS screw anchors consist of three galvanized components: the lead section, the extension shaft, which includes an integral coupling, and the guy adapter. Extensions and guy adapters include a high-strength bolt and nut.

Typical working torque is 10,500 ft.-lb. and minimum ultimate tension strength is 100,000 lb. Note: Ultimate strength ratings apply to properly installed anchors only. Failure to install within 5° of alignment with the guy load will significantly lower strength.

Ordering Information

HIGH-STRENGTH SS ANCHORS for Heavy Tension Loading

High-Strength SS Anchors for Heavy Tension Loading

Ordering Information

RATINGS

Mechanical Properties 1.75" Square Shaft
Max. Installation Torque 10,500 ft.-lb.
Min. Ultimate Tension Strength 100,000 lb.

LEAD SECTIONS

Helix Configuration Galv. L1
8 & 10" C1100227 30"
10" & 12" C1100884 42"
10", 12" & 14" C1100923 84"
8", 10" & 12" C1100235 60"
14", 14" & 14" C1100505 124"
8", 10", 12" & 14" C1100247 124"
ROCK-IT™ Square Shaft Lead Sections includes forged carbide tip to improve penetration
6" & 8" C1101295 36"
8" & 10" C1101296 36"
8" & 10" C1101294 64"
8", 10" & 12" C1101293 64"

EXTENSIONS

Helix Configuration Galv. L2
None C1100136 37"
None C1100137 59"
None C1100138 80"
None C1100140 124"
Single 14" helix C1100472 48"
Twin 14" helices C1100450 80"
Triple 14" helices C1100476 124"



Catalog No. Description
P0011443P Bolt used with SS175 Extension
P0011444P Bolt used with SS175 Guy Adapters
055591P Nut used with SS175 Extension
and Guy Adapters

TERMINATION ADAPTERS

Adapters Galv. Notes L3 Pulling Eye Rating
Thimbleye® Adapter +T1100311 (1) - 17" N/A
Twineye® Adapter with pulling eye T1100964 (1) - - 12,000 lbs
Twineye® Adapter without pulling eye T1100964A - - N/A
Tripleye® Adapter with pulling eye +T1100465 (1) - 17" 12,000 lbs
Tripleye® Adapter without pulling eye +T1100465A - 17" N/A
Ovaleye Adapter - - - N/A
Threaded Adapter +T1100352* L5=36" 48" N/A
Chain Shackle T1100134 L4=1-13/16 6-5/8" N/A

Hubbell Power Systems All contents Copyright© 2001 - Hubbell Incorporated. All rights reserved. Because Hubbell has a policy of continuous product improvement, we reserve the right to change design specifications without notice.
Terms of Use | Contact Us | Site Map | Careers
Anchoring