The Hubbell Power Systems 600 A 25kV rated Bolted Elbow Deadbreak Termination System is designed to terminate medium voltage UD cable to switchgear, transformers, sectionalizing cabinets and UD vault applications. It is fully compliant with IEEE-386 Standard and mates with bushing components that also comply with the IEEE-386 Standard. The Bolted Elbow system is comprised of a standard 600 amp t-body, an unthreaded compression lug, a cable adapter and a basic insulating plug with cap. The t-body can be ordered with or without a capacitive test point.
Bolted Elbow systems provide an economical means of terminating cable in applications where the visible open and ground will be achieved through the use of an internal switch and viewing window. In addition, it can be combined with other Bolted Elbow kits and/or deadbreak junctions to construct a multi-way separable splice.
Impulse withstand 1.2 x 50 μsec
AC One Minute
DC Fifteen Minute
|Corona Extinction Level @
|Continuous Current||600 amp|
|24 Hour Overload||1,000 A rms|
|25 kA rms sym. for 0.17 sec
10 kA rms sym. for 3.0 sec
|Tee-Body with Test Point with Aluminum Stud||625TBT|
|Tee-Body without Test Point with Aluminum Stud||625TB|
|Aluminum Insulating Plug with Cap||625BIP|
|Aluminum Insulating Plug with Cap and Aluminum Stud||625BIPS|
|5/8" - 11 UNC Threaded Aluminum Stud||625SA|
|Aluminum Compression Connector||625LUGXX|