210 N. Allen Street
Centralia, MO 65240

hubbellpowersystems.com/contact/

Home › Products › Connectors › Distribution › Compression Tees › Aluminum (Versatile™)

Aluminum (Versatile™)

VERSAtile™ ALUMINUM COMPRESSION TEE
ALUMINUM
VACT
  • For use with VERSA-CRIMP® or conventional tooling.
  • For aluminum to aluminum or aluminum to copper conductor tee combinations.
  • Uses the same installation tools and dies as VACS and VACL.
  • Color coded end plugs for easy die selection.
Material: Aluminum alloy-tin plated
Factory inhibited

AL9CU (90°C Rated)

CATALOG
NUMBER		 ALUMINUM OR COPPER CONDUCTOR VERSA-CRIMP
TOOL TYPE		 DIMENSIONS
INCHES (MM)		 APPROX.
WT. EACH
LBS.
(KG)
MAIN TAP L H
CONVENTIONAL
TOOLING		 VERSA-CRIMP
SYSTEM RANGE		 CONVENTIONAL
TOOLING		 VERSA-CRIMP
SYSTEM RANGE
VACT1010 1/0 Str. Al/Cu #8-1/0 Str. Al/Cu 1/0 Str. Al/Cu #8-1/0 Str. Al/Cu VC6 (ALL) 4-1/2
(114.3)		 2-5/8
(66.7)		 .106
(.05)
VACT4040 4/0 Str. Al/Cu #2-4/0 Str. Al/Cu 4/0 Str. Al/Cu #2-4/0 Str. Al/Cu VC6 (ALL) 5-1/4
(133.4)		 3-1/16
(77.8)		 .237
(.11)
VACT300300 300 MCM Al/Cu 1/0-300 MCM Al/Cu 300 MCM Al/Cu 1/0-300 MCM Al/Cu VC6 (ALL) 5-1/2
(139.7)		 3-5/16
(84.2)		 .350
(.16)
VACT500500 500 MCM Al/Cu 4/0-500 MCM Al/Cu 500 MCM Al/Cu 4/0-500 MCM Al-Cu *VC6500
VC63
VC6FT		 7-9/16
(192.1)		 4-7/16
(112.7)		 .579
(.26)
VACT750750 750 MCM Al 500-750 MCM Al
500 MCM Cu		 750 MCM Al 500-750 MCM Al
500 MCM Cu		 VC6FT
VC8		 8-13/16
(223.9)		 5-1/4
(133.4)		 .747
(.34)
  • Refer to page DC-58 & DF-59 for recommended tool and die information.
  • HIGH VOLTAGE APPLICATIONS-All Aluminum/Copper and Copper Lugs (VCEL, VACL, VHCL, VHCS and VCELC) are rated at 34.5 KV. The other U.L. listed compression connectors (VACS, VACT, VCCT, VHSS and VHS) have a maximum UL voltage requirement of less than 2000 volts, however Anderson recommends these connectors for application through 34.5 KV subject to the manufacturers' limitations and recommendations for the insulation material. For further information, contact factory.
  • *Not Ul listed-pending completion of test.
Hubbell Power Systems All contents Copyright® 2001 - Hubbell Power Systems, Inc. All rights reserved. Because Hubbell has a policy of continuous product improvement, we reserve the right to change design specifications without notice.
Terms of Use | Contact Us | Site Map | A subsidiary of Hubbell Incorporated
Connectors