For sales and support visit:
hubbellpowersystems.com/contact/

Home › Products › Lineman Grade Tools › Jumpers / Load Pick-Up › Jumper Terminals

Jumper Terminals

for 15kV EPR Jumper Cable only

These shrouded terminals are for use with only grounding clamps (see Section 3000 and EPR Jumper Cable (Page 2306) as temporary jumper assemblies (and should not be used with insulated jumper clamps, page 2302). Extra heavy-duty shroud prevents excessive cable stress at terminal connection. To match pressuretype and threaded connectors on grounding clamps, both plug and stud terminal styles are available.

Two crimps in Section "A" with Burndy die numbers (or equivalent) below secure terminal to cable.

Anderson VERSA-CRIMP® compression tools are acceptable for making these crimped connections.

PLUG TERMINALS (NO THREADS)
Type III per ASTM F 2321 Standard Specification

Cable Size Catalog No. Burndy Die No. Weight per terminal
One Unit, Not Installed
#2 C6010190 U243 2 oz.
1/0 C6010191 U243
2/0 C6010192 U166-206
4/0 C6010193 U249

STUD TERMINALS (THREADED)
Type III per ASTM F 2321 Standard Specification

Cable Size Catalog No. Burndy Die No. Weight per terminal
One Unit, Not Installed
#2 C6010198 U243 3 oz.
1/0 C6010199 U243
2/0 C6010200 U166-206
4/0 C6010201 U249
Hubbell Power Systems All contents Copyright© 2001 - Hubbell Incorporated. All rights reserved. Because Hubbell has a policy of continuous product improvement, we reserve the right to change design specifications without notice.
Terms of Use | Contact Us | Site Map
Lineman Grade Tools