For sales and support visit:

Tool & Rubber Protective Bags & Buckets

Tool Bucket

(12" dia. x 15" D) - Molded plastic bottom with 21/2-inch tapered molded flange up sides. Top has molded plastic ring, 1/2-inch polypropylene rope handle, standard 4" x 8" inside pocket.

Tool Bucket

(7" dia. x 10" D) - For steel tower work, it has a molded plastic top and bottom, with 3/8-inch Chemline rope handle.

Lineman's Tool Bag

(22" L x 11" W x 11" D) - Plywood bottom covered inside and out with metal skids on bottom of bag. Has full separating heavy duty zipper, heavy webbing handles, completely around the bag, and full 4-inch pocket on the inside.

Glove Bag

(18" L x 8" W) - One piece front and back, bar-tacked at all corners. Leather reinforced inside and out for snap, and double nylon stitched. Gusset has 4-inch top tapering to 2- inch bottom.

Sleeve Bag

(27" L x 12" Top - 7" Bottom) - For flat storage of rubber sleeves. Bar-tacked corners, snap fasteners, and double nylon stitching.

Combination Glove and Sleeve Bag

(18" L x 8" W) - Separate storage for rubber gloves and sleeves. Single flap, double nylon stitching, reinforced inside and out for snap.

Line Hose Bag

(48" L x 7" Dia.) - With 3-inch wide plastic top ring, molded plastic bottom with 2-inch cuff, and 3/8-inch rope handle.

Cat. No. Description Weights
C4170144 Tool Bucket (15" Deep) 2 lb. 8 oz.
C4170146 Tool Bucket (10" Deep) 12 oz.
C4170147 Lineman's Tool Bag 3 lb.
C4170148 Glove Bag 8 oz.
C4170149 Sleeve Bag 10 oz.
C4170150 Glove & Sleeve Bag 10 oz.
C4170151 Line Hose Bag 2 lb.
Hubbell Power Systems All contents Copyright© 2001 - Hubbell Incorporated. All rights reserved. Because Hubbell has a policy of continuous product improvement, we reserve the right to change design specifications without notice.
Terms of Use | Contact Us | Site Map | Careers
Lineman Grade Tools