For sales and support visit:
hubbellpowersystems.com/contact/

Braces, Flat Crossarm

Have rounded ends and are punched at one end with a 9/16" hole, with a 7/16" hole at the other end. Holes punched 1-inch from brace end to center of hole. Hot dip galvanized.

Catalog
Number
Steel
Size
Length
Hole
to Hole
Hole
Sizes
Length
End to
End
Approx.
Ship Wt.
per Each
7020* 7/32" x
1-7/32"
18" 7/16" &
9/16"
20" 1.40 lbs.
7026 24" 26" 1.85 lbs.
7028# 26" 28" 2.00 lbs.
7030#* 28" 30" 2.15 lbs.
7032 30" 32" 2.25 lbs.
7126 1/4" x
1-1/4"
24" 26" 2.30 lbs.
7128# 26" 28" 2.40 lbs.
DB2F14 26" 7/16" & 11/16" 28" 2.40 lbs.
7130# 28" 7/16" &
9/16"
30" 2.55 lbs.
7132# 30" 32" 2.75 lbs.
T2030463 30" Two 9/16" 32"
C2030233 32" 7/16" &
9/16"
34" 2.95 lbs.
T2030459 34" 36" 3.00 lbs.
T2060398 36" 38" 3.16 lbs.
Hubbell Power Systems All contents Copyright© 2001 - Hubbell Incorporated. All rights reserved. Because Hubbell has a policy of continuous product improvement, we reserve the right to change design specifications without notice.
Terms of Use | Contact Us | Site Map | Careers
Pole Line Hardware