For sales and support visit:
hubbellpowersystems.com/contact/

Racks, Secondary

Medium and Heavy Types

These racks have fabricated steel points that are permanently welded to the rack bases. The entire unit is hot dip galvanized. Insulators are not included.

Secondary Racks
Catalog Number Number of Wires Duty Rating Style Length of Back Width of Back End Mounting Hole Spacing Approx. Ship Wt. per Each
C2070049 2 Medium Duty, 12 Gauge (.109" ) Extended Back 18" 2 7/8" 16" 4.60 lbs.
C2070047# 3 26" 24' 6.60 lbs.
C2070050# Heavy Duty, 9 Gauge (.148") Non-extended Back 21-3/4" 3-1/4" 16" 7.00 lbs.
C2070052# Extended Back 26" 24" 8.00 lbs.
C2070048# 4 Medium Duty, 12 Gauge (.109" ) 34" 2-7/8" 32" 8.80 lbs.
C2070051# Non-extended Back 29-3/4" 3-1/4' 24" 10.20 lbs.

Secondary Rack Pole Mounting Bands

For attaching secondary racks to tubular metal poles. Bands are equipped with 5/8" x 2" carriage bolts for attaching the racks, and 1/2" x 1-5/8" oval-shoulder clamp bolts for tightening bands on pole. Hot dip galvanized 1/4" x 1-1/2" steel. Made in two styles, the single type for attaching one rack and the double type for two racks.

Secondary Rack Pole Mounting Bands
Catalog Number Type Pole Dia. Attachment Bolts Clamping Bolts Steel Size Approx. Ship Wt. per Each
DG4B1 Single Rack Mounting 2 1/2" to 3' One 5/8" x 2" Two 1/2" x 3 1/2" Carriage Bolts 1/4" x 1 1/2"  
DG4B2 3" to 3 1/2"  
DG4B3 3 1/2" to 4"  
DG4B4 4" to 4 1/2"  
636412 4 3/8" to 5" Two 1/2" x 1 5/8" Oval Shoulder Bolts 3.04 lbs.
PS6366 6" to 6 5/8" 3.68 lbs.
PS6367 7" to 7 5/8" 4.06 lbs.
PS6368 8" to 8 5/8" 4.80 lbs.
637412 Double Rack Mounting 4 3/8" to 5" Two 5/8" x 2" 3.88 lbs.
PS6376 6" to 6 5/8" 4.40 lbs.
PS6377 7" to 7 5/8" 4.75 lbs.
PS6378 8" to 8 5/8" 5.24 lbs.

Secondary Rack Extension

Where obstructions are to be overcome and where proper clearances are required, this bracket is fastened to the pole for mounting secondary racks. Made of hot-galvanized 9-gauge steel, it is equipped with a 5/8" x 2" carriage bolt. Curved back is 3" wide.

Secondary Rack Extension
Catalog Number Extension Center Mounting Hole Side Mounting Holes Steel Size Width of Back Approx. Ship Wt. per Each
PS2355 6" 11/16" 9/16" 9 Gauge (.148") 3" 3.08 lbs.
2357 9"     4.05 lbs.

Offset Secondary Racks

 
Catalog Number Number of Wires Extension Mounting Hole Spacing Mounting Hole Size Approx. Ship Wt. per Each
PSC2060700 1 11 1/2" 9" to 10" 5/8" x 1 1/4" 6.34 lbs.
PSC2060702 3 12" 17 11/16" to 18 13/16" 12.92 lbs.
Hubbell Power Systems All contents Copyright© 2001 - Hubbell Incorporated. All rights reserved. Because Hubbell has a policy of continuous product improvement, we reserve the right to change design specifications without notice.
Terms of Use | Contact Us | Site Map | Careers
Pole Line Hardware